基于局部积分均值的经验模态分解改进算法

端点效应和模态混叠现象是经验模态分解算法应用中存在的主要问题。在介绍标准经验模态分解算法的基础上,阐述了基于局部积分均值经验模态分解算法的基本原理,提出自适应的端点局部积分均值拟合线的拟合方法。改进算法通过距离相关度函数在待分解信号内部寻找与端点处信号变化趋势相关度最高的一段波形,并用此段波形的局部积分均值拟合线来重新刻画端点处的局部积分均值拟合线,将修正后的局部积分均值拟合线应用于EMD算法筛选过程中。仿真实验结果表明,改进算法有效抑制了模态混叠和端点效应现象,提高了分解的精度和可靠性。     

一种新型竹材生态护岸型式及其稳定性模拟分析

本文以济南创新谷小刘河山区河流段为研究区域,提出一种竹材式柔性锚固框架生态护岸结构,并对该结构进行稳定性模拟分析,旨在确定新型竹材生态护岸所能发挥最佳锚固作用的合适工况。研究通过ABAQUS有限元软件进行强度折减计算,将竹筋模拟为"锚固杆"的部件作用于边坡,模拟不同的坡角、土质类型对于边坡模型稳定性的影响。数值模拟计算结果表明:新型竹材护岸锚固框架结构可有效地对粉质黏土边坡和黄棕壤土边坡进行锚固。随着坡度的增加,竹筋深层锚固作用效果愈加明显,安全稳定性能得到了稳定的提升。其中60°边坡锚固后效果最佳,两种土质边坡的塑性应变与位移均减小近100%。     

基于改进LMD方法的风电机组齿轮箱故障诊断研究

局部均值函数的求取是局部均值分解(LMD)的关键环节。针对局部均值函数求取存在偏差进而造成模态混叠的问题,提出了一种基于局部积分均值的LMD风电机组齿轮箱故障诊断方法。该方法改变了对相邻两极值点求平均值的思路,采用求取相邻两极值点的局部积分均值,再通过滑动平均法进行平滑处理,最终得到局部均值函数。为实现风电机组齿轮箱故障诊断,首先采用改进LMD方法对信号进行降噪处理,然后采用多尺度熵提取降噪处理后信号的特征向量,最后采用极限学习机进行故障诊断。通过仿真分析,证明了该方法能有效解决模态混叠现象,提高了LMD的分解精度。试验验证分析表明,该方法的故障诊断准确率为100%,通过对比分析表明,该方法优于其他故障诊断方法,具有工程应用价值。     

中置式高压电容器柜改进设计

分析了南屯煤矿白马河风井变电所高压电容器柜原设计方案存在的问题,并对其进行了改进设计:选用适用于容性负载的真空断路器;添加放电线圈,并将放电线圈与电容器直接并联,使放电线圈与电容器组成一个完整的放电回路;添加接地开关,接地开关既有机械闭锁又有电气联锁,操作方便,安全性高。实际应用表明,改进设计后的高压电容器柜功能更加完善,更加安全、可靠。     

积分分离PID算法的电阻炉温度控制系统

为使大惯性、纯滞后的电阻炉温度控制系统的动态性能和稳态精度满足要求,提出了Smith预估结合积分分离PID算法;设计了温度控制器的硬件系统;对控制系统进行辨识;分析了Smith预估结合积分分离PID算法与单纯Smith预估控制算法的区别,并对两种控制算法进行了比较分析,确定了电阻炉温度控制系统参数;最后对Smith预估结合积分分离PID算法进行了电阻炉的温度控制实验;实验结果表明,采用Smith预估结合积分分离PID算法提高了电阻炉温度控制系统的稳定性,降低了系统的超调,稳态精度达到0.2℃,其动态性能和稳态精度满足系统控制要求.     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.     

Some investigations on fuzzy P + fuzzy I + fuzzy D controller for non-stationary process

The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal.     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

The volume integral method of eddy-current modeling: Verification

The volume integral method of eddy-current modeling represents a flaw in metal as a set of electric dipoles located within volume elements or cells defining the flaw volume. Given this dipole distribution, impedance changes may be computed. The electric field of the dipole distribution is determined by an integral equation relating, by means of the electric field Green's tensor, the electric field due to the source to the total electric field in the flaw. The integral equation is solved by assuming that the total electric field is constant in each volume element, resulting in a matrix equation. The method has been programmed for use on a microcomputer. The method and computer program are verified using the analytical solution for a small spherical flaw and three sets of measured impedance data, measured by air-core coils along profiles overlying both surface-breaking and buried simulated flaws of known dimensions. Operating frequencies ranged between 900 and 4000 Hz. Generally agreement is good at lower frequencies ( 1000 Hz). At higher frequencies ( 4000 Hz), the agreement is not as good. This is thought to be due to the inability of the constant electric field approximation to model the steep electric field gradients present in the host metal at high frequency. The results are also sensitive to the method of computation of the electric field due to the source. Some improvements can and should be made to the method.